MicrostructureEvolution相关论文
为了解钛合金在冷压缩过程中的变形机理和微观组织演变,使用Gleeble 3800热模拟试验机进行冷压缩试验.在冷压缩试验中,通过不同应......
Regulative effect of Mg/Si ratio on microstructure evolution and mechanical properties of cast Al-Li
The effect of the Mg/Si ratio of Al-2.5Li-1Cu-0.8Mg-0.8Si, Al-2.5Li-1Cu-1.6Mg-0.8Si, and Al-2.5Li-1Cu-2.4Mg-0.8Si alloys......
采用电子背散射衍射(EBSD)技术对冷轧后铜镍合金管材的组织进行分析.通过对第二道次冷轧不同变形量(3.19％、9.57％、19.37％、23.97％、31......
采用搅拌摩擦加工技术对2mm厚Al-Mg-Si(6061-T6)合金板材进行加工.研究了具有相同速度比的搅拌摩擦加工对搅拌区微观组织演变、显......
The QP980-DP980 dissimilar steel joints were fabricated by fiber laser welding.The weld zone (WZ) was fully marten-sitic......
Effect of microstructure evolution and crystal structure on thermal properties for plasma-sprayed RE
In this work,the microstructure evolution,thermal expansion,thermal conductivity,and thermal shock resistance properties......
...
A multi-phase-field model has been developed to simulate the microstructure evolution and kinetics of the austenite stat......
In order to investigate the microstructure and mechanical property evolution of low-carbon reduced activation ferritic/m......
Influence of Extrusion Speed on the Microstructure Evolution, Interface Bonding and Mechanical Respo
The Mg MB26/Al 7075 composite rod,in which Mg MB26 serves as the sleeve and Al 7075 serves as the core,is fabricated via......
The effect of stacking fault energy (SFE) on the grain structure evolution of face-centered cubic metals during friction......
Microstructure Evolution and Growth Orientation of Directionally Solidified Mg-4 wt％ Zn Alloy with D
...
Immiscible alloys have aroused considerable interests in the last decades on account of their special physical and mecha......
Microstructure Evolution and Grain Coarsening Behaviour During Partial Remelting of Cyclic Extrusion
...
The microstructure evolution and formability of Ti-10V-2Fe-3Al alloy related to the initial microstructures and processi......
...
Friction Stir Processing of Thixoformed AZ91D Magnesium Alloy and Fabrication of Surface Composite R
...
A comparative study on the superplastic tensile behaviors of the as-extruded Ti6Al4V alloys and TiBw
In this study, the mechanisms behind the superplastic behavior of the as-extruded Ti6Al4V alloys and TiBw/Ti6Al4V compos......
Microstructure evolution and formation mechanism of raded cemented carbide with cubic-carbide-free l
The graded cemented carbide with cubic-carbide-free layer(CCFL)in the surface layer is synthesized by employing TiN or T......
Experiments were carried to investigate the effect of TiC on the solidification process and microstmcture of Al-Pb alloy......
The effect of severe plastic deformation on the properties and microstructure of W-Cu composites produced by multi pass ......
Most synthetic materials,when subjected to dynamic stress,will undergo microstructural damage.Conversely,biological tiss......
Continuum process modeling of point defect and impurity aggregation during silicon crystal growth and wafer annealing ha......
The quench sensitivity of a 6351 alloy was determined by time-temperature-transformation (TTT) curves and time-temperatu......
The microstructure of nickel-based single-crys-tal(SC)superalloys has a pivotal influence on their creep properties.The ......
采用激光熔注技术在Ti-6Al-4V表面制备了ZrO2p热障涂层,利用X-射线衍射、电子背散射衍射及扫描电镜技术,研究了激光熔注过程中ZrO2......
通过金相观察和电子背散射衍射技术,研究了7A85铝合金在应变速率0.001～1 s-1、变形温度250～450°C条件下的微观组织演变规律,并基于K......
Tailoring microstructure evolution and mechanical properties of a high-performance alloy steel throu
Direct laser deposition (DLD), as a popular metal additive manufacturing process, shows advantages of technical flexibil......
Microstructure evolution and mechanical anisotropy of M50 steel ball bearing rings during multi-stag
This study aimed to explore the evolution of flow lines and microstructures of M50-steel bearing ring and the anisotropy......
将冷轧Ti/Al层状复合材料在675～750℃下进行不同时间的退火处理,退火过程中钛和铝都保持过剩,研究了Ti/Al层状复合材料的界面微观组......
采用应变诱发熔化激活法(SIMA)制备具有非枝晶显微组织的Mg-10%Al-1%Zn-1%Si合金,并且研究压缩变形量对Mg-10%Al-1%Zn-1%Si合金半......
Numerical Simulation of Microstructure Evolution during Directional Solidification Process in DS Tur
Directional solidified (DS) turbine blades are widely used in advanced gas turbine engine.The size and orientation o......
Influence of Si Contents on the Microstructure Evolution and Mechanical Properties of Al?Mg?Si?Cu?Zn
The influence of different Si contents on the microstructure evolution and mechanical properties ofAl?Mg?Si?Cu?Zn alloys......
Microstructure evolution or degradation has been well recognized to be closely related to the formation of microcracks i......
Ag-Mo-O ternary oxide has attracted growing attention because of its potential as a solid lubricant at high temperatures......
...
Microstructure evolution and reaction behavior of Cu-Ni alloy and B4C power system was studied by in-situ and static exp......
This work focuses on analysis of microstructure morphology and crystallographic orientation for Ti-17 alloy during hot w......
An insight into Mg alloying effects on Cu thin films:microstructural evolution and mechanical behavi
How to design ultra-strong,light-weight Cu alloys is a long-term pursuit in materials community,which is technically sup......
Microstructural evolution and FCC twinning behavior during hot deformation of high temperature titan
Although the development of titanium alloys with working temperatures above 600 ℃ faces enormous difficulties and chall......
